News Center

1 High-platform ball valve, the so-called high-platform ball valve adopts ISO5211 manufacturing standard, a square or circular flange and ball valve are cast into a single body, and the end surface of the platform is higher than the outer edges of the flanges at both ends。This not only facilitates the installation of pneumatic actuators, electric actuators and other actuators, but also greatly improves the stability between the valve and the actuator, and the appearance is more beautiful and refined

2 The high platform ball valve is an evolution of the conventional ordinary bracket ball valve. The difference between it and the ordinary ball valve is that it can be directly connected to the drive actuator without installing a connecting bracket, while the ordinary ball valve needs to be installed before the actuator can be installed. . In addition to avoiding additional bracket installation, because it is installed directly on the platform, this greatly improves the stability between the actuator and the ball valve.

3 The advantage of the high platform ball valve is that it can directly install pneumatic or electric actuators on its own platform, while ordinary ball valves require additional valve connections. This may occur due to loose brackets or excessive coupling gaps. As a result, the valve is affected in use, and the high platform ball valve will not have this problem. Its performance is very stable during operation.

4 In the selection of high-platform ball valves and ordinary ball valves, the internal structure of the high-platform ball valve is still on the principle of opening and closing. It is---straight with the ordinary ball valve. In addition to the advantages described above, when the medium temperature is relatively high , It is necessary to use a connecting bracket to protect the normal use of the actuator and prevent the heat transfer of the medium from causing the actuator to be unusable.