News Center

High platform ball valve, the so-called high platform ball valve, adopts is05211 manufacturing standard, casting a square or round flange and ball valve as a body, and the end face of the platform is higher than the outer edge of the flange at both ends, which is not only conducive to the installation of pneumatic actuator, electric actuator and other actuator devices, but also greatly improves the stability between the valve and the actuator, and the appearance is more beautiful and refined.

    The high platform ball valve is an evolution product of the conventional ordinary bracket ball valve. The difference between the high platform ball valve and the ordinary ball valve is that it can be directly connected with the driving actuator without adding the connecting bracket, while the ordinary ball valve can only be installed with the actuator after the bracket is installed. In addition to eliminating the additional bracket installation, because it is directly installed on the platform, the stability between the actuator and the ball valve is greatly improved.

    The advantage of high platform ball valve is that it can directly install pneumatic or electric actuator on its own platform, while ordinary ball valve needs additional valve connection, which may affect the valve in use due to loose bracket or excessive coupling clearance. High platform ball valve will not have this problem, and its performance is very stable during operation.

    In the selection of high platform ball valve and ordinary ball valve, the internal structure of high platform billiard valve is still the principle of opening and closing, which is consistent with ordinary ball valve. In addition to the advantages mentioned above, when the medium temperature is relatively high, the connecting bracket should be used to protect the normal use of the actuator and prevent the actuator from being unable to use due to medium heat transfer.